Starlink Mini, Standard or Performance on a standing-seam roof: which pipe adapter, which mount?
To put a Starlink dish on a standing-seam roof without drilling, you need two things that are not in the same box: a mount that clamps the seam and gives you a vertical pipe, and a pipe adapter that sets the dish on that pipe.
In short
Mini: The pipe adapter comes with the Starlink Mini kit and fits our 42.4 mm tube (checked by us). Standard: not in the box; buy the Standard Pipe Adapter in the Starlink shop. Performance: not in the box; buy the Performance Pipe Adapter in the Starlink shop. Which FalsMount model (Standard or XL) fits depends on your roof’s seam spacing, not on the dish.
Three parts
The dish (Starlink); the Starlink pipe adapter for your dish; the roof mount. FalsMount is a kit of two Orima CHA077 clamps (made in Finland), base plate, swivel bracket and a 42.4 mm standing tube (400 mm, pre-drilled); the bracket compensates roof pitches of 0–45° so the tube stands vertical. The Starlink app shows you how to turn the dish.
Table
| Dish | Pipe adapter | Pipe range per Starlink | FalsMount 42.4 mm tube |
|---|---|---|---|
| Mini | adapter in the Starlink Mini kit | pipe range not stated in the Starlink documents | fits (checked by us on the 42.4 mm tube) |
| Standard | Standard Pipe Adapter | 31–63.5 mm, metal pipes only | 42.4 mm is in range |
| Performance | Performance Pipe Adapter | 38–60 mm, metal pipes only | 42.4 mm is in range |
Ranges: Starlink manufacturer figures (accessory guides, November 2026), check the current Starlink shop listing before buying.
Model by roof
Seam spacing 270–550 mm: FalsMount Standard (€149). 551–600 mm: FalsMount XL (€249), made to your spacing. Under 270 mm: the mount grips the seam after next; the double spacing must be between 270 and 600 mm (e.g. spacing 180 mm → 360 mm). Below 135 mm spacing it does not fit. Over 600 mm: send spacing and photo. Seam height 23–37 mm: within the working range we measured with these clamps (our measurement, not yet a figure confirmed by Orima); near either end, send a photo first; over 37 mm: not confirmed, please contact us. Final price plus shipping. Shipping to Germany for FalsMount Standard: €17.69 (Omniva, with tracking). No VAT is charged (seller not VAT-registered). Returns & withdrawal
Before you buy
Check for obstructions in the Starlink app at the planned spot; measure seam spacing and seam height in the main roof area, not at the verge; Mini: the adapter comes with the Starlink Mini kit and fits our tube; Standard and Performance: order the pipe adapter in the Starlink shop. This page does not answer wind or snow load questions; see “Wind and snow”.
Fit check
Dish sorted? Now the roof: enter seam height and spacing in the fit check and see whether Standard or XL fits.
Prefer email? Photo and measurements to hello@falsmount.com.
Brand note: Starlink is a trademark of SpaceX, named only to describe which dishes the mount carries. FalsMount is not a Starlink product and is neither sold nor recommended by Starlink/SpaceX.
FalsMount is the no-drill standing-seam mount this blog is written around — one part instead of three from different catalogues.See the mount, orcheck which roofs it fits.